NYLGP-19.jpg (86399 bytes)

Here's a look at the coin door cutout. If you're wondering how to cut a hole in the center of a piece of wood with a Jigsaw, here's the deal. Get a large bore drill bit and drill holes on the corners of your cutting marks. Then simply place the jigsaw blade in the hole and cut. Easy, huh? - Also, the left side of the picture is the bottom of the machine. This is because the top side of this piece of wood goes halfway past the control panel extension. The right side is where the holes for the coin buttons would eventually be cut (Just above the cut out).     

      Main Page    Gallery    Build A Cabinet